GL Racing  |  Artikelnummer: AC002-K

GL Racing Receiver 1.5mm JST Conversion Kit

29,00 kr

Få prismatch på GL Racing Receiver 1.5mm JST Conversion Kit

Har du hittat varan billigare hos en annan återförsäljare? Klistra in länken här nedanför, så får du snabbt svar på om vi kan matcha priset. Vi tittar på totalpriset — alltså inkl. frakt, tull och avgifter — och varan bör finnas i lager hos dem. Vi matchar om vi kan. Läs villkoren här.

Lagerstatus:

I lager hos leverantör - beställ nu, levereras om 7-9 dagar

Hämtning:

Ej i lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Leverans inom några vardagar
  • Frakt beräknas i kassan
  • Certifierad dansk webbutik (E-mærket)
  • Enkel och säker betalning
  • Kan hämtas i vår butik i Nørresundby
     Visa butiksinformation

Beskrivning

Description 
Contains: 3 JST sockets (1 spare), 10cm heat shrink tubing (enough for 2 attempts).
WARNING: For people with good soldering skills ONLY!!!
WARNING: Convert your Receiver at your our risk, Receiver warranty void
For people looking for a quick and easy solution, please consider our adapters instead:
 
For those not afraid of all the warnings, this conversion kit supplies you with 1.5mm JST sockets suitable for GLA, AMZ, BZ plugs. It provides a neat and low weight, low c.g. solution for using regular receivers for larger scales such as the Sanwa RX-471.
See picutres below for a idea how the conversion was made:
Step 1 - Remove original socket pins
Step 2 - Bend JST socket legs to correct width
Step 3 - Solder JST socket to receiver board
Step 4 - Continue solder JST socket to receiver board
Step 5a - Dremel RX-471 casing to fit
OR
Step 5b - Heat shrink Receiver board

 

Forsendelse

Vi benytter GLS:

Pakkeshop: fra 35 kr.
Direkte til adresse: fra 59 kr.
Erhverv: fra 49 kr.

GL Racing

GL Racing Receiver 1.5mm JST Conversion Kit

29,00 kr
Description 
Contains: 3 JST sockets (1 spare), 10cm heat shrink tubing (enough for 2 attempts).
WARNING: For people with good soldering skills ONLY!!!
WARNING: Convert your Receiver at your our risk, Receiver warranty void
For people looking for a quick and easy solution, please consider our adapters instead:
 
For those not afraid of all the warnings, this conversion kit supplies you with 1.5mm JST sockets suitable for GLA, AMZ, BZ plugs. It provides a neat and low weight, low c.g. solution for using regular receivers for larger scales such as the Sanwa RX-471.
See picutres below for a idea how the conversion was made:
Step 1 - Remove original socket pins
Step 2 - Bend JST socket legs to correct width
Step 3 - Solder JST socket to receiver board
Step 4 - Continue solder JST socket to receiver board
Step 5a - Dremel RX-471 casing to fit
OR
Step 5b - Heat shrink Receiver board

 

Visa produkt
Tillbaka till toppen