PN Racing  |  Artikelnummer: MR2609

PN Racing 64 Pitch Delrin Pinion 9T (2pcs)

49,00 kr

Få prismatch på PN Racing 64 Pitch Delrin Pinion 9T (2pcs)

Har du hittat varan billigare hos en annan återförsäljare? Klistra in länken här nedanför, så får du snabbt svar på om vi kan matcha priset. Vi tittar på totalpriset — alltså inkl. frakt, tull och avgifter — och varan bör finnas i lager hos dem. Vi matchar om vi kan. Läs villkoren här.

Lagerstatus:

Ej i lager

Hämtning:

Ej i lager

I lager? Då skickar vi om:

Snabb leverans från vårt lager i Danmark

Snabb leverans från vårt lager i Danmark
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Leverans inom några vardagar
  • Frakt beräknas i kassan
  • Certifierad dansk webbutik (E-mærket)
  • Enkel och säker betalning
  • Kan hämtas i vår butik i Nørresundby
     Visa butiksinformation

Beskrivning

Description

ONLY use on 64 Pitch Spur Gear For replace PN Racing MR2044 or MR2045 Ball Diff Download Printing Size 2WD Gear Ratio Chat Modifying the Kyosho diff to fit the PN Ball Bearing Spur Gears. Pic 1 & 2: The inner hub of the diff extends slightly outward from the diff ring. With the new gears that bump gets in the way and will not let the gear sit flush with the diff ring. Pic 3 : Use some 400 grit sand paper. Pic 4: Lay the paper on a flat surface then in a circular motion sand down the hub. Keep checking the hub and stop when it sits flush with the diff ring. Pic 5 6 & 7: Here is the sanded down diff now sanded down enough for the PN gears. Pic 8: Here is the Diff with the gear installed before the outer hub goes on. Pic 9: This is the Kyosho Diff with the new PN Ball Bearing Spur Gear installed. This was very easy to do and only took about 15 minutes to complete.

Frakt

Vi skickar med GLS från vårt lager i Danmark.

Frakten beräknas i kassan.

PN Racing

PN Racing 64 Pitch Delrin Pinion 9T (2pcs)

49,00 kr

Description

ONLY use on 64 Pitch Spur Gear For replace PN Racing MR2044 or MR2045 Ball Diff Download Printing Size 2WD Gear Ratio Chat Modifying the Kyosho diff to fit the PN Ball Bearing Spur Gears. Pic 1 & 2: The inner hub of the diff extends slightly outward from the diff ring. With the new gears that bump gets in the way and will not let the gear sit flush with the diff ring. Pic 3 : Use some 400 grit sand paper. Pic 4: Lay the paper on a flat surface then in a circular motion sand down the hub. Keep checking the hub and stop when it sits flush with the diff ring. Pic 5 6 & 7: Here is the sanded down diff now sanded down enough for the PN gears. Pic 8: Here is the Diff with the gear installed before the outer hub goes on. Pic 9: This is the Kyosho Diff with the new PN Ball Bearing Spur Gear installed. This was very easy to do and only took about 15 minutes to complete.

Visa produkt
Tillbaka till toppen