Team Losi Racing  |  Artikelnummer: TLR332083 Producent varenr.: TLR332083  |  EAN: 605482671368

Ring and Pinion, Composite(Center Diff Only):22X-4

75,00 kr 79,00 kr

Få prismatch på Ring and Pinion, Composite(Center Diff Only):22X-4

Har du hittat varan billigare hos en annan återförsäljare? Klistra in länken här nedanför, så får du snabbt svar på om vi kan matcha priset. Vi tittar på totalpriset — alltså inkl. frakt, tull och avgifter — och varan bör finnas i lager hos dem. Vi matchar om vi kan. Läs villkoren här.

Lagerstatus:

I lager hos leverantör - beställ nu, levereras om 6-9 dagar

Hämtning:

Ej i lager

I lager? Då skickar vi om:

Snabb leverans från vårt lager i Danmark

Snabb leverans från vårt lager i Danmark
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Leverans inom några vardagar
  • Frakt beräknas i kassan
  • Certifierad dansk webbutik (E-mærket)
  • Enkel och säker betalning
  • Kan hämtas i vår butik i Nørresundby
     Visa butiksinformation

Beskrivning

Features

  • Molded from specially formulation high impact composite, these gears are highly durable
  • Composite Ring and Pinion sets are 11g lighter than the stock versions, so 22g if replacing front and rear ring and pinions
  • With 22g removed from the drivetrain, the chassis will stay flatter and carry more corner speed with the lighter gears
  • Note – Run with center differential only. If run with a slipper, the gears will likely fail
  • Note – Requires use of M2.5 x 10mm flat head screws (included) rather than the kit M2.5 x 8mm flat head screws
  • Note – Requires use of two 10x14x0.1mm shims between the gear and bearing on the gear side (included)

Frakt

Vi skickar med GLS från vårt lager i Danmark.

Frakten beräknas i kassan.

Team Losi Racing

Ring and Pinion, Composite(Center Diff Only):22X-4

75,00 kr 79,00 kr

Features

  • Molded from specially formulation high impact composite, these gears are highly durable
  • Composite Ring and Pinion sets are 11g lighter than the stock versions, so 22g if replacing front and rear ring and pinions
  • With 22g removed from the drivetrain, the chassis will stay flatter and carry more corner speed with the lighter gears
  • Note – Run with center differential only. If run with a slipper, the gears will likely fail
  • Note – Requires use of M2.5 x 10mm flat head screws (included) rather than the kit M2.5 x 8mm flat head screws
  • Note – Requires use of two 10x14x0.1mm shims between the gear and bearing on the gear side (included)
Visa produkt
Tillbaka till toppen