RPM  |  Artikelnummer: RPM80412 EAN: 80343118

RPM Pinion Case - Black - 80412

89,00 kr

Få prismatch på RPM Pinion Case - Black - 80412

Har du hittat varan billigare hos en annan återförsäljare? Klistra in länken här nedanför, så får du snabbt svar på om vi kan matcha priset. Vi tittar på totalpriset — alltså inkl. frakt, tull och avgifter — och varan bör finnas i lager hos dem. Vi matchar om vi kan. Läs villkoren här.

Lagerstatus:

Det finns 2 st i lager - beställ före kl. 15:00, levereras 26 sep. (2 dagar)

Hämtning:

Det finns 2 st i lager - Nørresundby

I lager? Då skickar vi om:

Snabb leverans från vårt lager i Danmark

Snabb leverans från vårt lager i Danmark
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Leverans inom några vardagar
  • Frakt beräknas i kassan
  • Certifierad dansk webbutik (E-mærket)
  • Enkel och säker betalning
  • Kan hämtas i vår butik i Nørresundby
     Visa butiksinformation

Beskrivning

RPM Pinion Protector Case


RPM designed this enclosed pinion case to hold each pinion on its own post. There is no need to tighten the setscrew to hold the pinions in place. Included is a peel-off decal sheet with two pinion-to-spur gear ratio charts for both 48 and 64 pitch gears. The appropriate chart can be placed in the recessed area on the bottom of the case. Also on the decal sheet is a set of numbered squares from 14 to 31 (gear teeth), which can be adhered to the inside of the case. There are ten blank squares so you can write in your own numbers if needed. RPM Pinion Cases are available in translucent blue or black and holds as many as 15 pinion gears.

Frakt

Vi skickar med GLS från vårt lager i Danmark.

Frakten beräknas i kassan.

RPM

RPM Pinion Case - Black - 80412

89,00 kr

RPM Pinion Protector Case


RPM designed this enclosed pinion case to hold each pinion on its own post. There is no need to tighten the setscrew to hold the pinions in place. Included is a peel-off decal sheet with two pinion-to-spur gear ratio charts for both 48 and 64 pitch gears. The appropriate chart can be placed in the recessed area on the bottom of the case. Also on the decal sheet is a set of numbered squares from 14 to 31 (gear teeth), which can be adhered to the inside of the case. There are ten blank squares so you can write in your own numbers if needed. RPM Pinion Cases are available in translucent blue or black and holds as many as 15 pinion gears.
Visa produkt
Tillbaka till toppen