📦 Vi bytter dine julegaver t.o.m. 1. februar 2027 📦

Hobbywing  |  Artikelnummer: HW30406903 Producent varenr.: 30406903  |  EAN: 6938994417464

Xrotor FPV Motor 3120 Pro 700kV 8S

724,00 kr

Få prismatch på Xrotor FPV Motor 3120 Pro 700kV 8S

Har du hittat varan billigare hos en annan återförsäljare? Klistra in länken här nedanför, så får du snabbt svar på om vi kan matcha priset. Vi tittar på totalpriset — alltså inkl. frakt, tull och avgifter — och varan bör finnas i lager hos dem. Vi matchar om vi kan. Läs villkoren här.


Lagerstatus:

Ej i lager

Hämtning:

Ej i lager

I lager? Då skickar vi om:

Snabb leverans från vårt lager i Danmark

Snabb leverans från vårt lager i Danmark

  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Leverans inom några vardagar
  • Frakt beräknas i kassan
  • Enkel och säker betalning
  • Kan hämtas i vår butik i Nørresundby
    Visa butiksinformation

Beskrivning

Hobbywing 30406903 – XRotor 3120 PRO 700kV 8S FPV MotorBrushless FPV motor for 9–11 inch builds on 8S LiPo: 700 kV, up to 7.32 kg of thrust per motor and 160 g including leads.The XRotor PRO 3100 series is Hobbywing's premium range of 31-size FPV motors, built for cinematic aerial filming, heavy camera payloads and competition. Hand-wound windings with a high slot fill, N52SH arc magnets and 0.1 mm low-loss stator laminations give more thrust and higher efficiency, and a self-cooling bell keeps temperatures down under heavy load. The 3120 is the largest motor in the PRO 3100 series. This 700 kV version runs on 8S with 9–11 inch tri-blade propellers and gives up to 7.32 kg of thrust per motor – for the heaviest camera rigs.FeaturesFully hand-wound windings with a high slot fillN52SH arc magnets for strong, heat-resistant performance0.1 mm low-loss silicon steel stator laminationsTitanium alloy shaft (5 mm)Self-cooling fin structure in the bell220 °C C-class enamelled wire, 12N14P configurationSold individually – a quadcopter needs four motorsSpecificationsKV: 700 kVLiPo: 8S (32 V)Motor size: Ø37.2 × 39.2 mmWeight: 160 g (incl. leads)Rated power: 600 WMax power: 3086 W (16 s)Max current: 96.5 A (16 s)Max thrust: 7.32 kg (11×4.5×3 propeller)No-load current: 2.5 AInternal resistance: 32.5 mΩShaft: Ø5 mm, 17 mm longMounting: 4 × M3 on Ø19 mmLeads: 16 AWG, 300 mmRecommended propellers: 9×5×3, 10×5×3, 11×4.5×3 (tri-blade)Recommended ESC: Hobbywing XRotor FPV 100A 4in1 8S LiteMax power and max current are full-throttle values at an ambient temperature of max. 25 °C, measured for the time stated in brackets.In the box1 × XRotor 3120 PRO 700 kV motorPropeller nut and mounting screws

Frakt

Vi skickar med GLS från vårt lager i Danmark.

Frakten beräknas i kassan.

Hobbywing

Xrotor FPV Motor 3120 Pro 700kV 8S

724,00 kr

Hobbywing 30406903 – XRotor 3120 PRO 700kV 8S FPV MotorBrushless FPV motor for 9–11 inch builds on 8S LiPo: 700 kV, up to 7.32 kg of thrust per motor and 160 g including leads.The XRotor PRO 3100 series is Hobbywing's premium range of 31-size FPV motors, built for cinematic aerial filming, heavy camera payloads and competition. Hand-wound windings with a high slot fill, N52SH arc magnets and 0.1 mm low-loss stator laminations give more thrust and higher efficiency, and a self-cooling bell keeps temperatures down under heavy load. The 3120 is the largest motor in the PRO 3100 series. This 700 kV version runs on 8S with 9–11 inch tri-blade propellers and gives up to 7.32 kg of thrust per motor – for the heaviest camera rigs.FeaturesFully hand-wound windings with a high slot fillN52SH arc magnets for strong, heat-resistant performance0.1 mm low-loss silicon steel stator laminationsTitanium alloy shaft (5 mm)Self-cooling fin structure in the bell220 °C C-class enamelled wire, 12N14P configurationSold individually – a quadcopter needs four motorsSpecificationsKV: 700 kVLiPo: 8S (32 V)Motor size: Ø37.2 × 39.2 mmWeight: 160 g (incl. leads)Rated power: 600 WMax power: 3086 W (16 s)Max current: 96.5 A (16 s)Max thrust: 7.32 kg (11×4.5×3 propeller)No-load current: 2.5 AInternal resistance: 32.5 mΩShaft: Ø5 mm, 17 mm longMounting: 4 × M3 on Ø19 mmLeads: 16 AWG, 300 mmRecommended propellers: 9×5×3, 10×5×3, 11×4.5×3 (tri-blade)Recommended ESC: Hobbywing XRotor FPV 100A 4in1 8S LiteMax power and max current are full-throttle values at an ambient temperature of max. 25 °C, measured for the time stated in brackets.In the box1 × XRotor 3120 PRO 700 kV motorPropeller nut and mounting screws

Visa produkt